1100LBS Electric Chain Hoist Winch 110V with 13ft 20Mn2 Chain Wired Remote Control

  
1100LBS Electric Chain Hoist Winch 110V w/ 13ft 20Mn2 Chain Wired Remote Control. 0.5Ton 1100lbs Electric Chain Hoist Winch w/13ft 20Mn2 Chain 110V Remote Control. Heavy objects, especially irregular objects, are hard to lift while costing lots of manpower. So an efficient lifting machine is necessary. A pure copper motor with high power (1300W) and a sturdy chain made of 20Mn2 ensure a strong load capacity (1100lbs) with high work efficiency. It will be a great assistant for your lifting work! With a powerful pure copper motor (1300W), it can lift heavy objects to a height of 13ft with a high speed (19.7ft/min) to promote efficient work while saving labor costs. The high-speed bearing can ensure that the bearing rotation gap of the motor remains unchanged under long-term use. It has a stable rotor axially with high motor force, which ensures good working performance. Meanwhile, the pure copper motor with good heat dissipation and good stability can provide strong power for lifting with low noise, giving you a more comfortable working environment. Top limiter touches the hook, the machine can automatically stop lifting to avoid damaging the machine due to excessive lifting. Meanwhile, the hook with a safety latch can rotate 360° to lift objects in all directions and allows the machine to be fixed stably at a high place or connected to most trolleys or beam clamps while promoting safety. The sturdy chain and hooks ensure a strong load capacity of 1100 lbs, allowing this product to lift heavy items. The aluminum alloy housing, 20Mn2 chain, and manganese steel hook with high strength and good rigidity can. Wear, corrosion, shock, and deformation.

Also, the silver point switch, high-speed synchronous gear, and three-wire power cord can be used for a long time and the high protection grade (IP55) allows it to be used in different environments. The highly insulated motor (Class F) can prevent thermal damage and the built-in electronic thermal protector can shut down the motor when its temperature rises or the running time is too long until the motor is completely cooled. The limit switch will be disconnected immediately after power failure. Besides, the reverse phase sequence protection device and dual brake system can also enhance safety. The built-in cooling fan and heat dissipation holes can dissipate heat quickly to reduce the risk of burning out the machine while ensuring stable operation for a long time.

This product doesn't need assembly and you can use it directly after receiving it. We aim to provide quality products and services. We will reply and solve the problem for you as soon as possible.

It can prevent the chain from moving during operation. The wired remote control allows you to control the lifting and lowering functions of the product within 10ft for safe operation. Meanwhile, you can press the emergency stop button on it to quickly brake the product, thus preventing sudden accidents. It is suitable for factories, docks, warehouses, logistics, construction sites, car manufacturers, railways, construction, garages, ceilings, attics, barns, lofts, etc. For lifting regular or irregularly shaped objects, and can be used for various lifting equipment such as single column, wall column, and crane.

Chain Diameter: 6.3mm/0.25inch. Motor Type: Pure Copper Motor. Maximum Load Capacity: 0.5T/1100lbs. Lifting Speed: 6m/min (19.7ft/min). Handle Switch Wire Length: 3m/10ft.

Package Size: 5128.539cm/20.911.2215.35inch. Machine Body Size (LH): 4215cm/16.545.91inch. If the specified object is too large or the object cannot be hung directly on the hook, you will need to tie a longer webbing around the object and then hook the webbing with the hook to lift the object. Please ensure that all persons in the immediate area are informed and warned of the need for safety before lifting and moving heavy objects. If necessary, set up a lifting area to remind unoccupied and uninvolved persons that they are not allowed in.

Please do not leave lifted heavy objects unsupervised for long periods as this may cause injury. The lifting weight shall not exceed the maximum load capacity of the product (1100 lbs). Please do not use multiple chain hoists to lift a heavy object or pull a heavy object horizontally. Please do not use the chain when it is bent or twisted. Please do not jerk the chain when it is not moving and stop immediately, then start debugging the product. Please do not throw the product to avoid damage. For the uniformly distributed work cycle, the maximum operation time of the hoist per hour is 25%, and it can handle up to 150 starts per hour. When used for infrequent working hours, it can run for 30 minutes from the cold start, with a maximum of 200 starts per hour. Before using the machine, please read carefully all the safety instructions in the product manual.

Please allow the slight color difference caused by the shootin. G light and 1-3cm error due to manual measurement, and make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them!

Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount.

Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday.