3000lbs Electric Winch Kit With Remote Control Strong Wire Rope Alloy Steel

  
EXCELLENT COPPER CORE TERMINAL: The winch adopts copper core terminal, which is not easy to corrode compared with iron terminal, possess good conductivity, low resistance and heat generation 2. STRONG AND TOUGH WIRE ROPE: Electric winch adopt multi strand wound solid wire rope, strong enough, more wear resistant 3. WINCH SEPARATION AND REUNION: Open the separation and reunion shell and manually release the rope, each model is with a separation and reunion on the right side of the machine 4. ALLOY STEEL HOOK: After high temperature quenching treatment, the tensile strength is stronger, the treatment is not easy to rust, and the buckle design prevent the hook from disengaging 5. EASY TO CONTROL AND INSTALL: Electric winch kit equipped with remote to control, and screws, nuts, washers for easy installation. Item Type: Electric Winch Kit Material: Alloy steel, stainless steel, copper Rated Pull: 3000lbs (1361kg) Motor: 1.1kw/1.4hp Gear Ratio: 150 to 1 Transmission Mode: Planetary gear transmission Wire Rope: Diameter: Approx. 4.8mm / 0.19in, Length: Approx. 6meter / 19.69ft Roll Size(diameter x length): Approx. 31.5 x 72mm / 1.24 x 2.8in Braking Device: Automatic brake Dimension(L x W x H): Approx. 299 x 100 x 105mm / 11.8 x 4 x 4.1in. Layer pulling force and layer rope capacity. Rated pulling force lbs(kgs). Wire rope length on drum ft(m). Do not use mechanical or power tools in wet locations. Don't get in the rain. Do not use power tools in the presence of flammable gases and liquids. Do not allow children to operate machines, tools or cables. Do not wear loose clothing and jewelry that can get caught on moving parts. It is recommended to wear protective, non conductive clothes and non slip shoes during operation. Wear guards to hide long hair.

Do not operate tools while taking wine and drugs. Keep your body and hands away from the fairlead during operation. Do not lift objects vertically.

The winch can only be used sideways. On the winch drum, the wire rope winding shall not be less than 5 turns. The wire rope end fasteners cannot bear the full load. Pull the connecting wire to move the machine, the rope will be broken. Don't let the rope slide in your hands.

For more than half of the load capacity, we recommend using the optional pulley to double the wire rope. The machine motor must be running during operation. If you turn off the motor and operate a relatively large winch, the battery will start the motor relatively weakly. Do not hang the wire rope upside down, it will damage the wire rope. Do not use a winch to lift or move people. Don't pull from extreme angles all the time. This will cause the wire rope to build up on the end of the drum. If there is a load on the winch, do not release the separation and reunion. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls.

Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.

We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.